Details
Blue Gold can be used in a variety of application methods and is safe for both ferrous and non-ferrous metals, does not harm painted surfaces, natural rubber, electric wiring insulation, leather, carpet, silicon rubber, neoprene or polypropylene.
This is the only product recommended by ALL four major aircraft engine manufacturers: Pratt & Whitney, G.E. Engines, Allison Engine and Rolls Royce. Blue Gold is recommended in their manuals to replace chlorinated hydrocarbons in various applications.
Blue Gold is not corrosive, flammable or toxic (either through vapor inhalation, skin contact or ingestion). All ingredients in Blue Gold are on the TSCA inventory list and Blue Gold has no B.O.D. (biological oxygen demand) and no V.O.C. (volatile organic compound).
Blue Gold is highly concentrated and can be used at various dilution ratios based on the amount of contamination, saving you from unnecessary waste. Blue Gold has an indefinite shelf life and at the recommended dilution ratio of 5% is about 44 cents per use gallon. In performance tests Blue Gold's tank life was four times greater than the products it was tested against.
Blue Gold helps to keep the equipment clean and corrosion free, eliminating lime and particle build-up on heating coils. Since Blue Gold does not react with the oils it removes, the product can be recycled again and again through filtration systems with little or no loss in efficiency. Blue Gold disperses oils so there is no sludge build-up. When the agitation system is turned off, oils rise to the surface and can be easily removed, while particulate matter settles to the bottom leaving the solution clean and virtually new.
Blue Gold is also great for cleaning Scuba Diving equipment!
Warranty Information
